Skip to content
  1. We are now on the Shopify platform, please allow 1-2 days for orders to go out as we work out the new flow. Also, please let us know if anything is broken! Thanks for the continued support!
The Miters Touch - For Bridges
The Miters Touch - For Bridges
The Miters Touch - For Bridges

FARR Frameworks

The Miters Touch - For Bridges

Sale price $185.00

Shipping calculated at checkout

Out of stock

The latest addition to The Miters Touch Series, this time for bridges. “Grip it. Rip it. Flip it. And Rip it again…”

This tool is used to hold bridges in a vise in a milling machine to help miter them with precision. The unique flipping mechanism rotates the entire upper half of the tool on center only requiring a single vise setup for both cuts. It’s also small enough that the top half of the tool can be removed and checked in the frame without loosing the base alignment.

Key Features

Tons of features on this simple little solution:

  • Precision alignment dowel keep the tool square after each flip.
  • Low profile thumb knobs with hex tightening to hold everything tight in each position.
  • FARR Signature “Get A Grip” Plates to protect the tool during repeated clamping.
  • FARR “Mermaid Scales” Teal Top cap with hex size etching for a friendly reminder.
  • Precision ground guide rods into precision press fit bushing for a smooth and rigid clamp.
  • An open top center for easy center finding with a pointer tool in the mill.
  • Steel threaded inserts in the body of the tool to handle the repeated thread forces.

Installation Information

For best results use a fine tooth 10TPI hole saw like these from metal-guru.com. If you are using anything else there are no guarantees but ease into it especially at the beginning of the cut.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Testimonials

Absolutely stunning, from the shipping and delivery to the impeccable packaging and identification of the parts. I installed in about ten minutes with the video which was linked to my phone via the QR code included in the kit.. Can't say enough about the fit and finish of this kit. Very reasonable price too when you consider all of the extras.

David L.

Hood Strut Kit Review

The mounting system works great. I originally installed my MaxxAir fan with sheet metal screws but opted to replace it with with this and glad I did.

Michael O.

MaxxFan Interior Mounting Kit

Star Rating5 out of 5 starsDescriptionVery well built, the fact that the harness came with everything you need for a clean and easy look and install deserves more than five stars. Thank you!

Lulian T.

Sprinter Horn Upgrade Kit Reivew